All Categories

Home > News

What are the features of rotational molding water tank? What are the differences?

By admin In Art, News Posted 2023-03-29

At this stage, there are many plastic water tank manufacturers, and there are many kinds of specifications, so how to identify rotational plastic water tank and blow molding water tank? Rotational molding manufacturers and everyone about the interpretation of it.

The principle of rotational molding is: the plastic raw materials are put into the single wall closed mold quantitatively, the mold equipment is on the support frame and can rotate, the pyrogen heats the mold, the plastic melts according to the endothermic reaction of the mold wall, adheres to and slowly deposits on the inner wall of the mold, after all the plastic in the mold melts, the heating is stopped, the cooling is stopped, the mold is discharged, and the product is obtained.

Blow molding, also known as hollow blow molding, is a fast developing plastic processing method. The tube shaped plastic blank obtained by extrusion or injection molding of thermoplastic resin is placed in the opposite die while it is hot (or heated to soften). After the die is closed, the air is compressed in the blank immediately to make the plastic blank inflate and cling to the inner cavity of the die. After cooling, the hollow products are obtained.

1610005607405217

Blow molding and rotational molding products are all hollow, and the surface is not flat. The surface of rotational molding products is close to the mold, and the mold materials harm the handle of the product surface.

Blow molding products will appear blowing port, injection molding products have injection port, rotational molding can be seamless. Blow molding process of plastic water tank light weight, rotational molding process of plastic water tank net heavy, the relative price is much higher.

The process is different. Blow molding is injection + blow; injection molding is injection + press; rotational molding is extrusion + press. Nowadays, mold processing can be very detailed, and it is difficult to distinguish only by analyzing the surface of plastic parts. Generally, the surface of injection parts is smooth, while blow molding products are mostly matte. Blow molding can be used as hollow products, but injection molding is not good. Injection molding has a rubber inlet, but blow molding does not.

Blow molding is generally dominated by HDPE. Generally speaking, injection molding is a solid core, blow molding and rotational molding are hollow core. Blow molding is generally used for hollow goods, such as Aquarius, teapot, and various daily chemical appliances.

Hot categories